SPIRO THE TECH GURU

Back

Explain the Routing Tables?

By Admin on

ROUTING TABLES

A routing table contains the information necessary to forward a packet along the best path toward its destination. Each packet contains information about its origin and destination. When a packet is received, a network device examines the packet and matches it to the routing table entry providing the best match for its destination. The table then provides the device with instructions for sending the packet to the next hop on its route across the network.

A basic routing table includes the following information:

      Destination: The IP address of the packet's final destination

       Next hop: The IP address to which the packet is forwarded

·        Interface: The outgoing network interface the device should use when forwarding the packet to the next hop or final destination

·        Metric: Assigns a cost to each available route so that the most cost-effective path can be chosen

·       Routes: Includes directly-attached sub nets, indirect  sub net  that are not attached to the device but can be accessed through one or more hops, and default routes to use for certain types of traffic or when information is lacking.Routing tables can be maintained manually or dynamically. Tables for static network devices do not change unless a network administrator manually changes them. In dynamic routing, devices build and maintain their routing tables automatically by using routing protocols to exchange information about the surrounding network topology. Dynamic routing tables allow devices to "listen" to the network and respond to occurrences like device failures and network congestion.


SPIRO Google Plus